Friday, July 2, 2010

ANNOUNCEMENT for HRTM 135

July 7, 2010 (Wednesday) lectures on 8:00 - 9:00 and 4:00 - 5:00 and July 8, 2010 (Thursday) 8:00 - 9:00.. we will not meet on during lecture time..

Here is what you should do:

1. meet with your group mates.

2. decide on what specific hospitality industry will u be promoting
hotels
restaurant
food chains
resort
leisure cruise
airlines
tourist spots (local, national, global) - most preferable if local spots in your own provinces... promote your local tourism
and many others

3. once decided, its time for you to create your blogs.

4. you can use blogspot.com, wordpress.com, yahoo blogs, facebook blogs, friendster blogs and other blogging sites.

5. make sure to describe in your blogs that it is a blog for your HRTM135 subject then give me the complete URL of your blogs in our next meeting during our lecture. it will be viewed in our lecture time from time to time for improvement and progress...

keep posted...and post comments for questions and clarifications

Wednesday, June 30, 2010

QUIZ ANNOUNCEMENT

Chapter 1 Quiz on July 5, 2010 for MW class and Quiz on July 6, 2010 for TTh class.. Be conscious of your time. 30-minute quiz only.

Monday, June 7, 2010

CHAPTER 2 : SOFTWARE, PROCEDURE

2.1.2 SOFTWARE
Software is the step-by-step instructions that tell the hardware how to perform a task. Without software, the hardware is useless. Software is of two types: Systems software and Applications software.

Applications software is the software that can perform useful work on general-purpose tasks while the systems software enables the applications software to interact with the computer and help the computer manage the internal resources.

2.1.3 DATA / INFORMATION

2.1.4 PROCEDURE
Procedures are the steps for accomplishing a result. Some procedures maybe expressed in manuals or documentation.

2.15 PEOPLE
People are the most important part of, and the beneficiaries of, a computer-and-communications system. The whole point of data processing is to benefit people. People of all level and skills, from novices to programmers, are the users and operators of the system. Regardless of the size of the data processing system, data processing personnel will probably be needed to make the system efficient and effective.

For a small organization, there maybe only one or two people in the data processing department. A large system may require literally hundreds or even thousands of personnel. A small business owner who decides to operate a microcomputer will be performing the functions of a complete data processing department.

People and procedures are probably the easiest elements to understand in a computer-and-communications system – although, arguably the most complicated.

CHAPTER 2 : COMMUNICATIONS HARDWARE

2.1.1.5 COMMUNICATIONS HARDWARE

“Computers and communications: these are the parents of the Information Age. When they meet, the fireworks begin”.

This was written by one writer who referred to fireworks as how portable information and communications technologies are changing the conventional meanings of time and space.

The physical locations we traditionally associate with work, leisure and similar pursuits are rapidly becoming meaningless. The term cyberspace, which was coined by William Gibson in his novel Neuromancer, referring to a futuristic computer network that people use by plugging their brains into it, has become very popular. It has now come to mean the whole wired and wireless world of communications.

Connectivity is the ability to connect devices by telecommunications lines to other devices and other sources of information. With connectivity, or connected communications devices, users can use the technology for a number of purposes, ranging from low-skill to high-skill activities. They can use telephone-related services, such as fax, voice-mail, and e-mail. They can do teleconferencing, share resources through workgroup computing and Electronic Data Interchange.

They can make their work portable with telecommuting, mobile workplaces, and virtual offices. They can use online information services for research, e-mail, games, travel services, and teleshopping. They can use electronic bulletin board systems (BBSs), large and small. They can connect with the global Internet and information gathering, e-mail and discussion and news groups. In the future, they can engage in interactive TV or video through set-top boxes, picture phones and TV/PCs.

Computers communicate in two main ways: through modems and through networks.

Modems allow computers to use the telephone lines or cellular connections to trade data.

Networks connect computers directly, either through special wires or by some form of wireless transmission. The communications hardware commonly used in business are as follows: modems, fax modems, and multiplexers, concentrators and front-end processors.

A modem (from modulator/demodulator) is a device that converts digital signals to analog format to allow data to be transmitted through a telephone line and from analog back to digital format to be accessed back by the computer on the other end.

Modems are probably the most widely used data communications hardware. They allow the user to directly connect the computer to the telephone line. They are either internal or external. An internal modem is located on a circuit board that is placed inside a microcomputer (plugged into an expansion slot). It draws its power directly from the computer’s power supply. An external modem is an independent hardware component – that is, it is outside the computer and uses its own power supply.

A fax modem, which is a circuit board inside the computer’s system cabinet, is a modem with fax capability. It enables one to send data and scanned-in images directly from one’s computer to someone else’s fax machine or fax modem.

When an organization’s data communications needs grow, the line available for that purpose often become overloaded, even if the company has leased one or more private telephone lines – called dedicated lines – used only for data communications.

Multiplexing optimizes the use of communications lines by allowing multiple users or devices to share one high-speed line, thereby reducing communications costs. Multiplexing can be done by multiplexers, concentrators, front-end processors.

A multiplexer is a device that merges several low-speed transmissions into one high-speed transmission. Messages sent by a multiplexer must be received by a multiplexer of the same type. The receiving multiplexer sorts out the individual messages and directs them to the proper recipient.

A concentrator is a piece of hardware that also enables several devices to share a single communications line. However, it collects data in a temporary storage area and then forwards them when enough has been accumulated to be sent economically. Often, a concentrator is a minicomputer.

A front-end processor is a smaller computer that is connected to a larger computer and assists with communications functions. It may itself be a minicomputer or a mainframe. It transmits and receives messages over the communications channels, corrects errors, and relieves the larger computer of routine computational tasks.

CHAPTER 2 : STORAGE HARDWARE

2.1.1.4 STORAGE HARDWARE

Secondary storage is external storage, that is, it is outside the system board. It is also referred to as permanent storage or auxiliary storage. The function of the storage hardware is to provide a means of storing software and data in a form that is relatively permanent, or nonvolatile, that is, the data is not lost when the power is turned off – and easy to retrieve when needed for processing.

Secondary storage devices come in the following forms: diskettes, hard disks, optical disks, magnetic tape, and flash memory cards.

A diskette, or floppy disk is a removable round, flat piece of mylar plastic flexible disk that stores data as magnetized spots. More specifically, data is stored as electromagnetic charges on a metal oxide film that coats the mylar plastic.

Data is represented by the presence or absence of these electromagnetic charges, following standard patterns of data representation (such as ASCII – American Standard Code for Information Interchange).

Two types of floppy disks are commonly used for microcomputers. The older and larger size is called minifloppy disk, 5 ¼ inches in diameter, comes in soft plastic envelopes about 5 1/2 inches square, and comes in capacities of 360 kilobytes (K) and 1.20 megabytes (M). The smaller and now the most popular size, is microfloppy disk. It is 3 ½ inches in diameter, comes in a hard plastic shell that measures about 3 1/2 inches by 3 3/4 inches and comes in capacities of 720 kilobytes (K) and 1.44 megabytes (M).

To use a diskette, the computer must have a floppy disk drive which is a device that holds, spins, and reads data from and writes data to a diskette.

Hard disks are thin but rigid metal platters that hold data as magnetized spots. They are sealed inside a hard disk drive which is usually built into the system unit in a microcomputer. Inside the hard disk drive is the disk is on the drive spindle, with read/write heads mounted on the actuator (access) arm that moves back and forth and power connections and circuitry.

Data may be recorded on both sides of the disk platters. External hard disk drives are also available, as are removable hard disk cartridges. An external hard-disk drive has its own power supply and is not built into the system cabinet. It is usually easy to add an external hard disk which can normally store gigabytes of data.

A hard disk cartridge consists of one or two platters enclosed along with read/write heads in a hard plastic case. The case is inserted into a detached cartridge system connected to a computer.

An optical disk is a removable disk on which data is written and read through the use of laser beams. The optical disk used with computers consists of four types: CD-ROM, CD-R, WORM disks, erasable optical disks.

CD-ROM, which stands for compact disk-read-only memory, is the best known type of optical disk. It is an optical disk format that is used to hold prerecorded text, graphics and sound. Read-only means the data stored on the disk can only be read but not modified or erased by the user.

CD-R, which stands for compact disk-recordable, is a CD format that allows user to write data onto a specially manufactured disk that can be read by a standard CD-ROM drive. WORM stands for write-once-read-many.

A WORM disk can be written, or recorded, onto just once and then cannot be erased, it can be read many times. WORM technology is useful for storing data that needs to remain unchanged, such as that used for archival purposes. An erasable optical disk allows user to erase data so that the disk can be used over and over again. The most common type is the magneto-optical disk which uses aspects of both magnetic disk and optical disk technologies.

Magnetic tape is made of flexible plastic coated on one side with a magnetic material on which data are represented with magnetized spots.

Magnetic tape used for computers is made from the same material used for audiotape and videotape. Because a tape is a long strip of magnetic material, the tape drive has to write data to it sequentially – one byte after another.

Sequential access is inherently slower than direct access used for disks. When a user wants to access a specific set of data on a tape, the drive has to skip over all data not needed to get to the data wanted resulting in a long access time.

The magnetic tape access time varies depending on the speed of the drive, the length of the tape, and the position on the tape to which the head wrote the data in the first place. On large computer, tapes are used on magnetic-tape units. On microcomputers, tapes are used in cartridge tape units and are nowadays used mainly to provide duplicate storage called backup.

Flash-memory or flash RAM cards consist of circuitry on credit-card-size cards that can be inserted into slots connecting to a motherboard of a microcomputer. They can hold up to 100 megabytes of data. Flash-memory cards, however, are not infallible. They circuits wear out after repeated use, limiting their life span.

CHAPTER 2 : PROCESSOR and MEMORY

2.1.1.3 PROCESSOR AND MEMORY

The complex procedure that transforms raw input data into useful information for output is called processing. To perform this transformation, the computer uses the processing and main memory devices, which are housed in the computer’s system unit or system cabinet. The system unit, or system cabinet, houses among other things, the electronic circuitry, called the CPU that does the actual processing and the main memory that supports processing.

The Central Processing Unit, or CPU, is the processor and is considered as the brain or heart of the computer. It reads and interprets software and coordinates the processing activities that must take place. In a microcomputer, the CPU is usually contained on a single integrated circuit or chip.

This single chip is called a microprocessor. This chip and other components necessary to make it work are mounted on a main circuit board called a system board. In larger computers, the CPU is contained on one or several circuit boards. The design of the CPU affects the processing power and the speed of the computer, as well as the amount of main memory it can use effectively.

The CPU uses the computer’s memory to hold pieces of data or information while it works with them, together with the instructions for processing these data. It operates like a chalkboard that is constantly being written on, then erased, and then written on again.

The main memory, which is also called random access memory (RAM), internal memory, or primary storage, is contained on chips mounted on the system board. The major attribute with main memory is storage capacity or size because it determines how much data can be processed at a time and how big and complex a program may be used to process it.

RAM is volatile, that is, all contents are lost when the computer’s power is shut off. To produce a copy of the data and instructions that are stored in the memory, they should be saved, before the computer is turned off, to a secondary storage device for future use.

CHAPTER 2 : OUTPUT HARDWARE

2.1.2 OUTPUT HARDWARE

Output Hardware consists of devices that translate information processed by a computer into a form that humans can understand. The two principal kinds of output are hardcopy and softcopy.

Hardcopy refers to printed output while softcopy refers to output that is not tangible. These include data that is shown on a display screen or in audio or voice form.

Devices that output hardcopy include printers, plotters and multifunction devices.

A printer is an output device that converts computer output into printed images. Printers are categorized according to whether or not the image produced is formed by physical contact of the print mechanisms with the paper.

Impact printers form characters or images by striking a mechanism such as a print hammer or wheel against an inked ribbon, leaving an image on paper. For microcomputer users, the most common impact printers are daisywheel and dot-matrix.

Non-impact printers, on the other hand, form characters and images without making direct physical contact between printing mechanism and paper. They are faster and quieter than impact printers because they have fewer moving parts.

Two types of non-impact printers often used with microcomputers are laser printers and ink-jet printers.

A third kind, the thermal printer, offers the highest-quality color printing available with a desktop printer. However, it is seen less frequently because it is expensive, and requires expensive paper. It uses colored waxes and heat to produce images by burning dots onto special paper.

Plotters are specialized output device designed to produce high-quality graphics in a variety of colors. They are especially useful for creating maps and architectural drawings, although they may also produce less complicated charts and graphs.

The three principal kinds of plotters are pen, electrostatic, and thermal.

Multifunction devices combine several capabilities, such as printing, scanning, copying, and faxing, all in one device.

Softcopy output generally refers to the display on a monitor, the output device that many people use the most.

Display screens or monitors are output devices that show programming instructions and data as they are being input and information after it is processed. On display screens, images are represented by individual dots or picture elements called pixels which are the smallest units on the screen that can be turned on and off or made different shades.

The two main types of monitors are cathode-ray tube and flat-panel displays.

A cathode-ray tube uses a vacuum tube like that in a television set while flat-panel displays are much thinner, weigh less, and consume less power.

Flat panel displays are made up of two plates of glass with a substance in between them, which is activated in different ways.

The three types of technology used for flat-panel display screens are: liquid-crystal display (LCD), electroluminescent (EL) display, and gas-plasma display.

Whether CRT or flat-panel, screen clarity depends on three qualities: resolution, dot pitch and refresh rate. To display graphics, a display screen must have a video display adapter, also called a graphics adapter card, which is a circuit board that determines the resolution, number of colors, and how fast images appear on the display screen.

Video display adapters embody certain standards. The Monochrome Display Adapter (MDA) and Color Graphics Adapter (CGA) are no longer favored. Newer computer displays tend to favor the Video Graphics Array (VGA), Super Video Graphics Array (SVGA) and Extended Graphics Array (XGA).

Other softcopy hardware includes audio-output devices, video-output devices, virtual reality devices and robots.

Audio-output devices include those devices that output voice or voice-like sounds and those that output music and other sounds. These include the voice-output devices which convert digital data into speech-like sounds.

The two types of voice-output technology that exist are speech coding and speech synthesis. Speech coding uses actual human voices speaking words to provide a digital database of words that can be output as voice sounds. Speech synthesis uses a set of 40 basic speech sounds (called phonemes, the bases of all speech in English) to electronically create any words.

Sound-output devices produce digitized sounds, ranging from beeps and chirps to music which are all nonverbal sounds. To be able to output sound, the computer must have the necessary software and the sound card, a digital audio circuit board plugged into an expansion slot in the computer.

For musical sounds, the two types of sound-output technology are FM synthesis and virtual acoustics.

In FM synthesis, a synthesizer mimics different musical instruments by drawing on a library of stored sounds. Sounds are generated by combining wave forms of different shapes and frequencies.

In virtual acoustics, instead of storing a library of canned sounds, the device stores a software model of an actual instrument.

Video-output includes videoconferencing, high-definition television and three-dimensional television.

Videoconferencing is a method whereby people in different geographical locations can have a meeting-and see and hear one another-using computers and communications.

High-definition television (HDTV) is a television system that features enhanced video and crisp, clear pictures. These pictures are far superior to any seen on television today.

The other kind of HDTV manufactured is the experimental 3D HDTV. It uses special glasses with polarized lenses, while others used what appeared to be normal screens but these screens employed hundreds of tiny prisms/lenses giving a stunning 3D effect.

Virtual reality is a kind of computer-generated artificial reality that projects a person into a sensation of three dimensional space. It has the ability to recreate physical places and phenomena real to people. It is one of the most exciting applications of computer technology to date.

Virtual reality uses the body’s senses of sight, sound, motion, and touch to simulate real objects or places. To achieve this effect, the following interactive sensory equipment is necessary: headgear, glove, and software.

Robots are automatic devices that perform functions ordinarily ascribed to human beings or that operate with what appears to be almost human intelligence. Robots are of several kinds – industrial robots, perception systems, and mobile robots.

All of these are the objects of study of robotics, a field that attempts to develop machines that can perform work normally done by people.

Robotics in turn is a subset of artificial intelligence, a family of technologies that attempts to develop computer systems that can mimic or simulate human through processes and actions.